• Mon. Jun 24th, 2024

Linksys Extender Not Joining Router Network Issue [Solutions]

Bysalmankhan

Nov 23, 2023
Linksys Extender

Is your Linksys wireless range extender not in the mood to join the network belonging to the host router? Is it happening during the setup via extender.linksys.com process? Well, that is troublesome. We are assuming that this could be due to these reasons:

  • The Linksys extender is not placed within the range of the router in your house.
  • You have committed the mistake of using a wireless medium to connect the devices.
  • The signals of either your extender or router are getting interrupted.

Now, you may read the troubleshooting solutions mentioned in this article and get an understanding of how to make the Linksys wireless range extender join the network of the router installed in your home in a hassle-free manner.

How to Fix Linksys Extender Not Joining Router WiFi Issue?

1. Place the Extender in the Range

To troubleshoot the Linksys extender not joining router network issue is to place the devices within the range of each other. As we mentioned above, your extender is not kept within the range of the router. This means that the router might be able to emit signals, but they are not exactly reaching the extender.
Reducing the distance between them might reverse the situation. Once you have followed this troubleshooting solution, it is recommended that you try to join the device using any source that you prefer. Once done, check in case the issue at hand has been fixed or not. What is that? Are you still not able to connect them?

ALSO READ THIS  The Process Behind EDM Hole Drilling and its Key Components in Minnesota

2. Do Not Use the Wireless Source

In case you are not able to establish a connection, let alone a strong one between the devices, it could be because the wrong source of connection has been used by you. To make it clear for you, we are assuming that the wireless source is used by you. For your information, it cannot be relied on. Why? The chances of a connection drop are very high.
Taking this into account, don’t you think you should change the source of connection? Nodding your head in yes? Well, in that case, it is recommended that you put an Ethernet cable to use. You can connect them by connecting the first end of the cable to the extender and another to the wireless router. Also, ensure that the connection is tight.

3. Change the WiFi Device Location

Despite the efforts which you have made, are you still experiencing the Linksys extender not joining the network of the router issue? Well, in that scenario, you should check the location of the networking device. Is the location not right? Is your extender kept near cordless phones, washing machines, or other smart home appliances?
Yes? To take care of the problem, you need to change the location of your Linksys wireless range extender and keep it away from every example of transmitting appliances, electronic devices, metal objects, and reflexive surfaces. We would also like to tell you that corners and walls can be harmful for your networking device too. Thus, do not keep it there.

ALSO READ THIS  Stainless-Steel Repair in Hampshire

Still Facing the Same Issue?

Your last resort is to reset the Linksys wireless range extender. You should know that whether you are trying to perform Linksys RE7350 reset or restore any other networking device to the default factory mode, the same instructions need to be applied. To learn about them, you can read what is given in the product manual of the device.

Final Words

The establishment of a connection between the Linksys extender and the host router is very important as it decides whether you will be able to get internet access on your client device, whether it is one or more than one, or not.
Considering you were not able to join the networking devices, reading the information given above helped you out. In case you did, then you are now free to enjoy a blazing-fast internet connection on your client device.
All you need to do is, just connect the device to the network and you are on the track. Did you like going through this article? Well, that is good. To celebrate it, you should drop some words of appreciation in the comment section. Others reading this post will like it.

Leave a Reply

Your email address will not be published. Required fields are marked *