• Sat. Jun 15th, 2024

Netgear Router Does Not Give Full Speed – How to Fix

Bynickparker955

Nov 30, 2023

Netgear routers are known for targeting the dead zones and transforming them into live internet zones. But, sometimes even after this practice, users complain that their routers do not give them full speed. Are you also having speed issues with your Netgear WiFi router? If yes, then it might be happening because of an outdated firmware version. Thus, you should first of all, access the Netgear router login page and upgrade the router’s firmware. Check out the next section to know the major highlights involved in the firmware update process.

Update Firmware If Router Does Not Give Full Speed

The process of upgrading the router’s firmware is quite simple. Here’s how to go about the same:

  • Connect your router firmly to the internet modem through an Ethernet cable.
  • Switch on your PC followed by the modem and router.
  • After that, connect the PC to the network that corresponds to your Netgear router.
  • Visit routerlogin.net and enter the relevant admin details.
  • You can find the Firmware Update option under the Maintenance section.
  • Click Check Now on the Firmware Update window.
  • Keep following the on-screen instructions in case a new firmware version is available.

Note: You might need to upload the firmware file again in case you are unable to update the router’s firmware using the above-mentioned instructions. For this, consider downloading the firmware file for the router’s model number you own from the official website.

ALSO READ THIS  Beyond Code: Exploring the Expertise of a Website Development Firm

After updating the firmware, there are 70% chances that the router will start giving full speed. Just in case you are failing, it is recommended that you take a tour through the below-given techniques and implement them.

Fixed: Netgear Router Not Giving Full Speed

Experiment with the Location

Perhaps, the location at which your WiFi router is placed has become an interference zone due to which it is not giving full speed. This must be known to you that a WiFi interference zone is an area where the WiFi signals of a networking device are most likely to get interrupted or diverted. This happens when the area houses a lot of devices or gadgets emitting electromagnetic radiations. WiFi interference also takes place when the router is not placed away from objects that contain a large amount of water or surfaces that are lustrous (reflexive) in nature. So, you must make sure that your WiFi router is not placed near such devices or objects.

Pro Tip: A weak Ethernet connection between the Netgear router and the internet modem can also act as a prominent factor stopping the former from giving you the full speed. Therefore, you are suggested to check the connection and make it finger-tight. Just in case, it is found damaged, you should get the cable replaced immediately.

ALSO READ THIS  Best App Development Company in Houston: A Comprehensive List of 10

Tweak Some Settings from Web Panel

You can also improve the speed of your Netgear WiFi router by making changes to some minor settings. You can enable 20/40 MHz coexistence that allows the user to navigate to the fastest frequency range available on his/her client device. In addition, you are suggested to cut off WiFi leeches by enabling the MAC filtering feature. Apart from this, enabling Smart Connect and changing WiFi radio settings can also work in your favor. But, you have to access the web-based management panel of the router first. For this, you should visit routerlogin.com on a computer connected to the Netgear router and complete the login process.

The Bottom Line

Getting lesser WiFi speeds from Netgear router is not a biggie. You can address the problem with the easiest hacks given above. We hope that after updating the firmware, relocating the router, and tweaking some settings, your Netgear router will give you the full speed.

In case it doesn’t, you should power cycle the router by unplugging it from the main socket and breaking its connection with the modem. After that, you are advised to wait for 20-30 minutes and do the exact opposite of what you did before waiting. You will notice a dramatic improvement in the performance of your router. However, you are free to go with the factory default reset process in case your router is not able to give you full speed even after numerous attempts. This will wipe out all the router’s settings and you will get the opportunity to set up the device again.

ALSO READ THIS  Are You Planning to Create a Successful App?

Leave a Reply

Your email address will not be published. Required fields are marked *