Are you questioning your decision to set up a Setek WiFi extender because it is not working properly now? Well, there is no need to worry. A lot of people install devices brought in by Setek. Some prefer setting up the Setek wireless security system. On the other hand, some go for the Setek extender setup like you. This post is written to help out all the Setek extender users including you who are unable to make the most of their WiFi range extenders because of improper working status. Keep reading.
Reasons: Setek Extender Not Working Properly
- The Firmware is Outdated
The very first reason why your Setek extender is not working properly is that you have not updated its firmware. Are you wondering what the relation between a firmware and the working status of the Setek extender is? Well, this must be known to you that the firmware is a software embedded in every networking device that tends to control its functionality. Running the device on an outdated firmware means an invitation to networking problems. Thus, you should access the Setek extender IP address as soon as possible and upgrade the firmware as soon as possible.
But, while you go for the extender’s firmware update, be very certain that you are not uploading the incorrect firmware file. The firmware file you upload must match the Setek WiFi extender model you are trying to update. And yes, you need to make sure that the firmware is the latest one and you are supposed to let the process get completed without any interruption.
Note: The poor placement of the extender can also force it to work improperly. So, you are advised to make sure that your range extender is not placed near any such device that tends to block or deviate WiFi signals. The placement of the range extender in a corner or near a thick concrete wall must also be avoided.
- Damaged Ethernet Cable
The Ethernet cable connection can also be a responsible factor behind the improper working status of the Setek extender. This is because many users tend to use old Ethernet cables for connecting their extenders to the main router. There are chances that you have also got your name written on the list of those users. So, you are required to pay attention to the Ethernet cable. On the off-chance, it is found damaged, you are suggested to get it replaced with a new one.
You should choose the cable that offers a higher transfer rate when employed in a home network. Above all, you must be very certain that the Ethernet cable has been connected to the correct ports of your WiFi devices (Setek extender and the main router). Connecting the cable to the wrong ports will not serve any purpose. Also, the ports must be in working status. When it comes to the ports to be utilized, you should choose the router’s LAN port and the extender’s Internet port.
Summing Up
Here ends our post written to make you understand why your Setek WiFi extender is not working properly. We are expecting that you are now familiar with the responsible factors that tend to stop your extender from delivering up to its full potential. If you fail to make it properly working, you should reboot it after disconnecting all the client devices. But, be sure that you give it the rest of at least half an hour.
Hundred to one shots, if you are still failing, you should not wait to implement the hack of restoring your Setek to the default factory settings. All you have got to do is press the button located inside the Reset hole using a pointed object. But, reconfigure it after that.