If your Wireless-N WiFi repeater is not working properly, then resetting it would be an ultimate solution. So, if you are facing issues with your WiFi repeater, just reset it back to factory default values. In this piece of writing, we have jotted down the steps to reset the repeater and after that, you will get to know the process of performing Wireless-N WiFi repeater setup. Keep reading!
Steps to Reset Wireless-N WiFi Repeater
The step-by-step instructions to reset your Wireless-N WiFi repeater are described below. Follow and apply them in the exact given order:
- Turn on your WiFi repeater ensuring that a steady and non-interrupted power supply is being provided to it. Also, check the wall socket of your wireless repeater! It should be well-working and free of damages.
- Secondly, if you have connected your repeater and your router, or any other device, kindly disconnect them for the time being.
- Now, locate the reset hole on your WiFi repeater.
- Press it using a paper clip, pin, or any similar object.
- Hold the repeater’s reset hole for 8-10 seconds and release it.
In this manner, you can reset your Wireless-N WiFi repeater. Now, you need to perform Wireless-N WiFi repeater setup from scratch.
How to Perform Wireless-N WiFi Repeater Setup?
Wireless-N WiFi repeater setup can be performed using two methods:
- First, using the manual method
- Second, using the WPS method
We will discuss Wireless-N WiFi repeater setup instructions using both methods one by one.
Wireless-N WiFi Repeater Setup | Manual Method
The manual Wireless-N WiFi repeater setup instructions are as follows:
Step 1: First things first, you need to choose a perfect location for your WiFi repeater. Ensure to place it in the same room as of your router. On the off chance, there isn’t any wall socket for your repeater in the router’s room, you can install it or use an extension cord.
Step 2: After choosing the correct location for your repeater, the next thing that you have to do is to power it on. After powering on the repeater, the power LED on it will start blinking. You have to wait till the LED gets stable.
Step 3: Now, you need to grab an Ethernet cable and connect your WiFi repeater and your host router. Verify that the cable is well-working and the connection between them is finger-tight. On the off chance, you find damages or defects on the cable, replace it right away.
Step 4: Turn on your desktop or laptop. Connect it to your WiFi repeater using an Ethernet cable or using a wireless source. For wireless source, click on the WiFi icon on your desktop/ laptop, locate the repeater’s SSID, click connect, and join the network using the WiFi password.
Note: Make sure that the software version on the desktop is up-to-date. If the software is not updated yet, update right away and launch a web browser of your choice in it. The browser’s version should be up-to-date as well.
Step 5: Enter 192.168.42.1 IP in the address bar and hit the Enter key. But, before you do that, means before you press the Enter key, kindly check the IP address entrée ensuing that it is entered without typing errors. Once you are sure about it, press the Enter key.
Step 6: As soon as you press the Enter key of your keyboard, the WiFi repeater admin window will be displayed. Here, you need to fill in the default login admin name and password of your WiFi repeater and click Login.
Note: If you do not know the default admin details of your WiFi repeater, kindly refer to its manual.
You Are Done!
Step 8: The repeater’s setup wizard will come in view. Locate and select the Wireless Repeater Mode > Repeaters- One Key Settings > Wireless Network Selection.
Step 9: Click Next, enter the WiFi password and Wireless-N WiFi repeater setup process will be completed using the manual method.
Wireless-N WiFi Repeater Setup | WPS Method
If you don’t want to use the manual method to set up your wireless repeater, then you can use the WPS method instead. It is one of the easiest methods to perform Wireless-N WiFi repeater setup. For instructions, scroll down a little!
- Place the repeater and router closer.
- Provide them steady electricity from their respective wall outlets.
- Press the WPS button on your WiFi repeater.
- Within 2-3 minutes, press the WPS button on your host router.
In this way, the WiFi repeater setup process can be completed using the WPS method.
The Last Words
Our article on how to reset and reconfigure Wireless-N WiFi repeater ends here. We hope that this troubleshooting guide will help you in an effective manner.